ip addresses

2 posts / 0 new
Topic locked
Last post
#1 Mon, 04/06/2009 - 03:49
wesleyh

ip addresses

To put a site on a different IP, do I need to do anything first or do I just need to type the ip address in the create virtual server page ? ("network interface": "virtual ip with: __"

As the other ips that my host assigned to me at the moment don't even load.

Mon, 04/06/2009 - 06:56
andreychek

Personally, I first add the IP address to the server first (which causes the IP to load on bootup), and then I setup the Virtual Server to use it.

In your case, I'd be curious if what you said might work -- adding it to the "Virtual IP with ___" line, and see if that causes .it to bring up a new interface with that IP.

If not, you'll simply need to add a new interface first. You can do that in Webmin -> Networking -> Network Interfaces, and add a new interface in there.
-Eric

Topic locked