The default self SSL certificate is overriding the letsencrypt certificate I have generated on my virtual host.
I am using 192.168.1.13 for virtualmin and 192.168.1.20 for foo.com.
However when I visit https://foo.com i get a certificate error and the self signed certificate that was generated when virtualmin was first installed.
The only way I have found of fixing this is to change two lines in ssl.conf from: SSLCertificateFile /etc/pki/tls/certs/localhost.crt SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
to
SSLCertificateFile /home/foo.com/ssl.cert SSLCertificateKeyFile /home/foo.com/ssl.key
However this is going to cause problems if I need to add a second virtual host with an SSL certificate. Why is Apache ignoring the httpd.conf lines pointing to foo.com?
You haven't given us any information about the OS version that you are using. Which is another way of saying you don't think the exact layout of Apache config files matters in this case. Maybe it actually does.
Is Apache ignoring only the SSL certificate lines for foo.com, or is it completely ignoring the entire
<virtualhost> ... </virtualhost>section for foo.com? Depending on the answer you will be one step closer to identifying the cause of the problem.Sorry its Centos 7 x86_64. Running on a Esxi.
It seems the other part of the vhost config is OK as the virtual host works without problem on the non https side.
Since http and https require different
<virtualhost> ... </virtualhost>sections, the fact that the one for http works doesn't mean that Apache isn't ignoring the one for https.In a CentOS 7 environment, the defaults for https are set in ssl.conf, but Virtualmin adds https sections into httpd.conf. So you have to consider the interaction of both files. Whereas for http, everything is in httpd.conf. So it's quite possible for https to work while https doesn't. One possible source of problems is if you edit httpd.conf trying to fix your https sites, not realizing that some lines you added into httpd.conf conflict with lines present in ssl.conf.
Here are the two config files, thank you for the assistance!
#
# When we also provide SSL we have to listen to the
# the HTTPS port in addition.
#
Listen 443
Listen 192.168.1.20:81
Listen 192.168.1.20:444
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
SSLSessionCache shmcb:/run/httpd/sslcache(512000)
SSLSessionCacheTimeout 300
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup file:/dev/urandom 256
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
#
# Use "SSLCryptoDevice" to enable any supported hardware
# accelerators. Use "openssl engine -v" to list supported
# engine names. NOTE: If you enable an accelerator and the
# server does not start, consult the error logs and ensure
# your accelerator is functioning properly.
#
SSLCryptoDevice builtin
#SSLCryptoDevice ubsec
##
## SSL Virtual Host Context
##
<VirtualHost 192.168.1.13:443>
# General setup for the virtual host, inherited from global configuration
#DocumentRoot "/var/www/html"
#ServerName www.example.com:443
# Use separate log files for the SSL virtual host; note that LogLevel
# is not inherited from httpd.conf.
ErrorLog logs/ssl_error_log
TransferLog logs/ssl_access_log
LogLevel warn
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect. Disable SSLv2 access by default:
SSLProtocol +TLSv1 +TLSv1.1 +TLSv1.2
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A new
# certificate can be generated using the genkey(1) command.
#SSLCertificateFile /etc/pki/tls/certs/localhost.crt
SSLCertificateFile /home/foo.com/ssl.cert
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
#SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
SSLCertificateKeyFile /home/foo.com/ssl.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/var/www/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x "%r" %b"
</VirtualHost>
httpd.conf
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin root@localhost
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />
AllowOverride none
Require all denied
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"
#
# Relax access to content within /var/www.
#
<Directory "/var/www">
AllowOverride None
# Allow open access:
Require all granted
</Directory>
# Further relax access to the default document root:
<Directory "/var/www/html">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Require all granted
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all denied
</Files>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
LogFormat "%h %l %u %t "%r" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog "logs/access_log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
</IfModule>
#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig /etc/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule>
#
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default. To use the
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8
<IfModule mime_magic_module>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile conf/magic
</IfModule>
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on
# Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any.
IncludeOptional conf.d/*.conf
SSLProtocol +SSLv3 +TLSv1 +TLSv1.1 +TLSv1.2
SSLCipherSuite HIGH:!SSLv2:!ADH:!aNULL:!eNULL:!NULL
ServerTokens Minimal
ServerSignature Off
TraceEnable Off
LoadModule php5_module /etc/httpd/modules/libphp5.so
<FilesMatch \.php$>
SetHandler application/x-httpd-php
</FilesMatch>
<VirtualHost 192.168.1.20:80>
SuexecUserGroup "#502" "#502"
ServerName foo.com
ServerAlias www.foo.com
ServerAlias webmail.foo.com
ServerAlias admin.foo.com
DocumentRoot /home/foo/public_html
ErrorLog /var/log/virtualmin/foo.com_error_log
CustomLog /var/log/virtualmin/foo.com_access_log combined
ScriptAlias /cgi-bin/ /home/foo/cgi-bin/
ScriptAlias /awstats/ /home/foo/cgi-bin/
DirectoryIndex index.html index.htm index.php index.php4 index.php5
<Directory /home/foo/public_html>
Options -Indexes +IncludesNOEXEC +SymLinksIfOwnerMatch +ExecCGI
allow from all
AllowOverride All Options=ExecCGI,Includes,IncludesNOEXEC,Indexes,MultiViews,SymLinksIfOwnerMatch
Require all granted
AddType application/x-httpd-php .php
AddType application/x-httpd-php5 .php5
</Directory>
<Directory /home/foo/cgi-bin>
allow from all
AllowOverride All Options=ExecCGI,Includes,IncludesNOEXEC,Indexes,MultiViews,SymLinksIfOwnerMatch
Require all granted
</Directory>
RewriteEngine on
RewriteCond %{HTTP_HOST} =webmail.foo.com
RewriteRule ^(.*) https://foo.com:20000/ [R]
RewriteCond %{HTTP_HOST} =admin.foo.com
RewriteRule ^(.*) https://foo.com:10000/ [R]
<Files awstats.pl>
AuthName "foo.com statistics"
AuthType Basic
AuthUserFile /home/foo/.awstats-htpasswd
require valid-user
</Files>
Alias /dav /home/foo/public_html
<Location /dav>
DAV on
AuthType Basic
AuthName "foo.com"
AuthUserFile /home/foo/etc/dav.digest.passwd
Require valid-user
ForceType text/plain
Satisfy All
RemoveHandler .php
RemoveHandler .php5
RewriteEngine off
</Location>
</VirtualHost>
SetEnv ODBCSYSINI /etc
SetEnv ODBCINI /etc/odbc.ini
<VirtualHost 192.168.1.20:443>
SuexecUserGroup "#502" "#502"
ServerName foo.com
ServerAlias www.foo.com
ServerAlias webmail.foo.com
ServerAlias admin.foo.com
DocumentRoot /home/foo/public_html
ErrorLog /var/log/virtualmin/foo.com_error_log
CustomLog /var/log/virtualmin/foo.com_access_log combined
ScriptAlias /cgi-bin/ /home/foo/cgi-bin/
ScriptAlias /awstats/ /home/foo/cgi-bin/
DirectoryIndex index.html index.htm index.php index.php4 index.php5
<Directory /home/foo/public_html>
Options -Indexes +IncludesNOEXEC +SymLinksIfOwnerMatch +ExecCGI
allow from all
AllowOverride All Options=ExecCGI,Includes,IncludesNOEXEC,Indexes,MultiViews,SymLinksIfOwnerMatch
Require all granted
AddType application/x-httpd-php .php
AddType application/x-httpd-php5 .php5
</Directory>
<Directory /home/foo/cgi-bin>
allow from all
AllowOverride All Options=ExecCGI,Includes,IncludesNOEXEC,Indexes,MultiViews,SymLinksIfOwnerMatch
Require all granted
</Directory>
RewriteEngine on
RewriteCond %{HTTP_HOST} =webmail.foo.com
RewriteRule ^(.*) https://foo.com:20000/ [R]
RewriteCond %{HTTP_HOST} =admin.foo.com
RewriteRule ^(.*) https://foo.com:10000/ [R]
<Files awstats.pl>
AuthName "foo.com statistics"
AuthType Basic
AuthUserFile /home/foo/.awstats-htpasswd
require valid-user
</Files>
Alias /dav /home/foo/public_html
<Location /dav>
DAV on
AuthType Basic
AuthName "foo.com"
AuthUserFile /home/foo/etc/dav.digest.passwd
Require valid-user
ForceType text/plain
Satisfy All
RemoveHandler .php
RemoveHandler .php5
RewriteEngine off
</Location>
SSLEngine on
SSLCertificateFile /home/foo/ssl.cert
SSLCertificateKeyFile /home/foo/ssl.key
SSLProtocol +TLSv1 +TLSv1.1 +TLSv1.2
SSLCACertificateFile /home/foo/ssl.ca
</VirtualHost>
OMG that's a lot. I would check to make sure the 'Listen' directives match the 'Virtualhost' directives. Also, I suggest doing all the checks they recommend on this page: https://wiki.apache.org/httpd/CommonMisconfigurations.
I'm having this same issue... setting up Centos 7 based web server and can't get any site.tld:443 virtual host to use it's own cert. Always picks up the cert from the
<VirtualHost default *:443>within/etc/httpd/conf.modules.d/00-ssl.confwhich is included by httpd.conf.Some other info - it's an AWS EC2 instance. The /home and /var/log folders are symlinked to a second EBS volume mounted at /data (/home->/data/home & /var/log->/data/log). I've modified all the SELinux labeling to match the default installation folders. SELinux is running in permissive mode so that shouldn't really matter anyway.
The hostname hase been set correctly (modified the AWS cloud.conf so it doesn't get overwritten each boot).
Apache version is 2.4.6 running in MDM Event. I currently only have two virtual domains on the machine. Both http and https content is served without issue but on https I get the invalid cert warning. The certificate is always this ...
SSLCertificateFile /etc/pki/tls/certs/localhost.crt
... no matter which domain I'm trying. It's like SNI isn't working at all.
Not sure it this is a red herring or not but trying the site with curl produces the following... (this is my test domain that will disappear as soon as I get things working :) )
[centos@aws-v2 ~]$ sudo curl -v -L https://www.4lawries.com
* About to connect() to www.4lawries.com port 443 (#0)
* Trying 54.206.91.84...
* Connected to www.4lawries.com (54.206.91.84) port 443 (#0)
* Initializing NSS with certpath: sql:/etc/pki/nssdb
* CAfile: /etc/pki/tls/certs/ca-bundle.crt
CApath: none
* Server certificate:
* subject: E=root@ip-172-31-10-67.ap-southeast-2.compute.internal,CN=ip-172-31-10-67.ap-southeast-2.compute.internal,OU=SomeOrganizationalUnit,O=SomeOrganization,L=SomeCity,ST=SomeState,C=--
* start date: Oct 18 04:34:03 2016 GMT
* expire date: Oct 18 04:34:03 2017 GMT
* common name: ip-172-31-10-67.ap-southeast-2.compute.internal
* issuer: E=root@ip-172-31-10-67.ap-southeast-2.compute.internal,CN=ip-172-31-10-67.ap-southeast-2.compute.internal,OU=SomeOrganizationalUnit,O=SomeOrganization,L=SomeCity,ST=SomeState,C=--
* NSS error -8156 (SEC_ERROR_CA_CERT_INVALID)
* Issuer certificate is invalid.
* Closing connection 0
curl: (60) Issuer certificate is invalid.
More details here: http://curl.haxx.se/docs/sslcerts.html
curl performs SSL certificate verification by default, using a "bundle"
of Certificate Authority (CA) public keys (CA certs). If the default
bundle file isn't adequate, you can specify an alternate file
using the --cacert option.
If this HTTPS server uses a certificate signed by a CA represented in
the bundle, the certificate verification probably failed due to a
problem with the certificate (it might be expired, or the name might
not match the domain name in the URL).
If you'd like to turn off curl's verification of the certificate, use
the -k (or --insecure) option.
The virtual host config for that domain is ...
SuexecUserGroup "#517" "#508"ServerName 4lawries.com
ServerAlias www.4lawries.com
ServerAlias webmail.4lawries.com
ServerAlias admin.4lawries.com
ServerAlias autoconfig.4lawries.com
ServerAlias autodiscover.4lawries.com
DocumentRoot /data/home/4lawries.com/public_html
ErrorLog /var/log/virtualmin/4lawries.com_error_log
CustomLog /var/log/virtualmin/4lawries.com_access_log combined
ScriptAlias /cgi-bin/ /data/home/4lawries.com/cgi-bin/
ScriptAlias /AutoDiscover/AutoDiscover.xml /data/home/4lawries.com/cgi-bin/autoconfig.cgi
ScriptAlias /Autodiscover/Autodiscover.xml /data/home/4lawries.com/cgi-bin/autoconfig.cgi
ScriptAlias /autodiscover/autodiscover.xml /data/home/4lawries.com/cgi-bin/autoconfig.cgi
DirectoryIndex index.html index.htm index.php index.php4 index.php5
<Directory /data/home/4lawries.com/public_html>
Options -Indexes +IncludesNOEXEC +SymLinksIfOwnerMatch +ExecCGI
Require all granted
#allow from all
AllowOverride All Options=ExecCGI,Includes,IncludesNOEXEC,Indexes,MultiViews,SymLinksIfOwnerMatch
AddType application/x-httpd-php .php
AddHandler fcgid-script .php
AddHandler fcgid-script .php5
AddHandler fcgid-script .php5.5
AddHandler fcgid-script .php5.6
AddHandler fcgid-script .php7.0
FCGIWrapper /data/home/4lawries.com/fcgi-bin/php5.6.fcgi .php
FCGIWrapper /data/home/4lawries.com/fcgi-bin/php5.fcgi .php5
FCGIWrapper /data/home/4lawries.com/fcgi-bin/php5.5.fcgi .php5.5
FCGIWrapper /data/home/4lawries.com/fcgi-bin/php5.6.fcgi .php5.6
FCGIWrapper /data/home/4lawries.com/fcgi-bin/php7.0.fcgi .php7.0
</Directory>
<Directory /data/home/4lawries.com/cgi-bin>
Require all granted
#allow from all
AllowOverride All Options=ExecCGI,Includes,IncludesNOEXEC,Indexes,MultiViews,SymLinksIfOwnerMatch
</Directory>
RewriteEngine on
RewriteCond %{HTTP_HOST} =webmail.4lawries.com
RewriteRule ^(.*) https://4lawries.com:20000/ [R]
RewriteCond %{HTTP_HOST} =admin.4lawries.com
RewriteRule ^(.*) https://4lawries.com:10000/ [R]
RemoveHandler .php
RemoveHandler .php5
RemoveHandler .php5.5
RemoveHandler .php5.6
RemoveHandler .php7.0
FcgidMaxRequestLen 1073741824
Redirect /mail/config-v1.1.xml /cgi-bin/autoconfig.cgi
Redirect /.well-known/autoconfig/mail/config-v1.1.xml /cgi-bin/autoconfig.cgi
IPCCommTimeout 31
SSLEngine on
SSLCertificateFile /data/home/4lawries.com/ssl.cert
SSLCertificateKeyFile /data/home/4lawries.com/ssl.key
SSLCACertificateFile /data/home/4lawries.com/ssl.ca
SSLProtocol +TLSv1.1 +TLSv1.2
I read on one forum that disabling the default virtual server in ssl.conf fixed this but then how do I get all the other default ssl config to be used without including it in every <VirtualHost... > config?
I also read that Apache 2.4 needs the cert and chain / CA appended into one file and provided as SSLCertificateFIle but couldn't confirm this - it would also be a real pain in the &#@ to have to do this manually for each cert renewal.
Any ideas? I can provide a webmin login if that helps (can't provide SSH at present as it's only working with certificates and I haven't worked out how to autogen new certs for new users)
Thanks Craig
Craig Lawrie IT Services Manager DNG Technology
PS... The version of cURL I'm using is curl 7.29.0 (x86_64-redhat-linux-gnu) libcurl/7.29.0 NSS/3.19.1 Basic ECC zlib/1.2.7 libidn/1.28 libssh2/1.4.3 Protocols: dict file ftp ftps gopher http https imap imaps ldap ldaps pop3 pop3s rtsp scp sftp smtp smtps telnet tftp Features: AsynchDNS GSS-Negotiate IDN IPv6 Largefile NTLM NTLM_WB SSL libz
And OpenSSL is OpenSSL 1.0.1e-fips 11 Feb 2013
So these should allow cURL to use SNI
Craig Lawrie IT Services Manager DNG Technology
Hey Craig,
Did you ever get an answer on this? I'm having the same issue, with the default cert overriding my Let's Encrypt issued cert:
curl -v -L https://nextcloud.sesp.northwestern.edu * Rebuilt URL to: https://nextcloud.sesp.northwestern.edu/ * Trying 129.105.185.131... * TCP_NODELAY set * Connected to nextcloud.sesp.northwestern.edu (129.105.185.131) port 443 (#0) * SSL certificate problem: Invalid certificate chain * Curl_http_done: called premature == 1 * Closing connection 0 curl: (60) SSL certificate problem: Invalid certificate chain More details here: https://curl.haxx.se/docs/sslcerts.html
Ryan