Virtualmin migration

4 posts / 0 new
Last post
#1 Tue, 12/21/2010 - 11:30
witoszek

Virtualmin migration

Howdy

I've got 2 question:

Firts of all i will describe my situation : Now i've got two servers and my proyect is a 3th server. One server it's now with virtualmin prof , another is gpl and 3th it will virtualmin pro. The question is these: How can i migrate virtual hosting to another server automatically? All virtulamin will be link with webmin.

Another question:

I've got problem of comunication between gpl and pro , each server have got it's own public IP and each one private ip and i can not to do a secondary dns or secondary email server.So can i do it? or may be i must to put thwo servers in a same switch?

Thanks

Witoszek

Tue, 12/21/2010 - 11:39
andreychek

Howdy,

How can i migrate virtual hosting to another server automatically?

I would suggest generating a backup of the Virtual Servers you wish to migrate, then importing those backups into your new server.

You can do that using the Backup and Restore option in Virtualmin.

I've got problem of comunication between gpl and pro , each server have got it's own public IP and each one private ip and i can not to do a secondary dns or secondary email server.

Are these servers behind a NAT router? Things tend to get more complex when the outside world uses a public IP address to access the server, and your LAN uses the internal IP.

What problem(s) are you having, specifically?

To keep things simpler, you may want to address the servers by IP address rather than domain name if they are indeed behind a NAT router (ie, if the IP address setup on the server itself is actually just the private IP).

-Eric

Tue, 12/21/2010 - 14:17 (Reply to #2)
witoszek

Howdy

Ok , i've added a webmin server with index of webmin server and comunication is fine , but now when i tried to do a secondary dns server it's tak a lot of time and it's doesn't nothing. The problem about nat router i think that solucionate with this :

I've do a server firewall with shorewall and then conect server on a dmz with a Dnat .The problem that ive got it is becouse in our country we've got a conection with only pppoe with public ip so i've got difficult with these configuration.In these time is not posible to have got a real public ip so we've got an dinamic public with it's wehavior like a static public ip.So i think that the next time i must do a vlan for these configuration but i'm not sure becouse conection is pppoe. So resume : conection pppoe <---------> server(shorewall)<-----> webserver

Thanks

Witoszek

My server is awiyem.com

Tue, 12/21/2010 - 15:03
witoszek

Howdy

I've just tried to do a secondary dns and then it's trying to conect and then there isn't a secondary dns. How can i see the error? becouse i haven't .

Thanks

Witoszek

Topic locked