Submitted by onmagic on Tue, 09/08/2020 - 20:03
I think there should have some problem in virtualmin, and it is happen again.
webmin is new installed, my pc will not shutdown and it keep running.
after installed, I have add 2 virtual server, it is normal usage
then I go to sleep ( around 6- 8 hours),
when I get up, refresh the https://[mydomain]:10000 in chrome,
the connection is refuse.
============================================================================================= I have tried to run the following command that you provide before : free -m dmesg | tail -30
result is :# free -m
total used free shared buff/cache available
Mem: 1838 563 1130 18 144 1120
Swap: 0 0 0
# dmesg | tail -30
[ 1.669617] systemd-journald[371]: Received request to flush runtime journal from PID 1
[ 1.807014] piix4_smbus 0000:00:07.3: SMBus Host Controller not enabled!
[ 1.809364] vmw_vmci 0000:00:07.7: Found VMCI PCI device at 0x11080, irq 16
[ 1.809413] vmw_vmci 0000:00:07.7: Using capabilities 0xc
[ 1.809549] vmw_vmci 0000:00:07.7: irq 60 for MSI/MSI-X
[ 1.809569] vmw_vmci 0000:00:07.7: irq 61 for MSI/MSI-X
[ 1.809782] Guest personality initialized and is active
[ 1.809831] VMCI host device registered (name=vmci, major=10, minor=58)
[ 1.809832] Initialized host personality
[ 1.830978] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.832877] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.834220] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.837084] cryptd: max_cpu_qlen set to 1000
[ 1.853861] SSE version of gcm_enc/dec engaged.
[ 1.868032] ppdev: user-space parallel port driver
[ 1.873054] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.873462] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
[ 1.957681] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.999392] type=1305 audit(1599549212.931:3): audit_pid=501 old=0 auid=4294967295 ses=4294967295 res=1
[ 2.267669] NET: Registered protocol family 40
[ 2.614937] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.654453] Ebtables v2.0 registered
[ 2.667898] Netfilter messages via NETLINK v0.30.
[ 2.674252] ip_set: protocol 7
[ 2.692017] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.692941] vmxnet3 0000:0b:00.0 eth0: intr type 3, mode 0, 3 vectors allocated
[ 2.695168] vmxnet3 0000:0b:00.0 eth0: NIC Link is Up 10000 Mbps
[ 2.816907] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.905268] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 22.936089] random: crng init doneStatus:
Active
Files:
Comments
Submitted by JamieCameron on Tue, 09/08/2020 - 22:48 Comment #1
Are there any messages in
/var/log/messagesabout Virtualmin's miniserv.pl process being killed due to lack of RAM?