On a GoDaddy VPS with CentOS 7 fresh install, I installed vm using install.sh
The network configuration has an internal IP but public IP is set on eth0:0, automatically.
I am able to access webmin after removing ipv6=1 line from /etc/webmin/miniserv.conf and restarting it.
The Re-check configuration passed without error.
I was able to create the first virtual server without error; but it used internal Ip.
But now, I am unable to access the server by dns (ns1.devlawn.com) or by its IP.
ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.198.21.142 netmask 255.255.252.0 broadcast 10.198.23.255
ether 00:18:51:76:b1:e5 txqueuelen 0 (Ethernet)
RX packets 183895 bytes 384823398 (366.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 108512 bytes 7572734 (7.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.169.139.136 netmask 255.255.255.255 broadcast 192.169.139.136
ether 00:18:51:76:b1:e5 txqueuelen 0 (Ethernet)
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 262 bytes 55465 (54.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 262 bytes 55465 (54.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
hostname -f
ns1.devlawn.com
Pls let me know if you need more info.....
Appreciate help.
Status:
Active
Comments
Update: Suddenly, webmin was down; had to restart.
Solved: Kind of!
Added the public IP as new shared IP address and set the public IP as the IP of domains. Working fine. But, still want to confirm if I did right or need to do something more...
Submitted by andreychek on Fri, 01/20/2017 - 22:21 Comment #5
Howdy -- hmm, it's tough to say why that may have fixed it exactly, as Webmin should always answer requests so long as it's listening on the IP address.
I'm wondering if restarting Webmin may have been what resolved it.
Do you happen to know what kind of VPS it is? Is it by chance running OpenVZ?
On a Self Managed plan! I chose to install CentOS 7.
Update: No OpenVZ.
Submitted by andreychek on Sat, 01/21/2017 - 09:31 Comment #7
There's a quick and easy way to determine that -- is there a file named /proc/user_beancounters? If so, can you paste in it's contents?