Get IPv6 to work in Virtualmin

I can't reach the site or the standard screen "It works!", when surfing in to the domain. I get "Page not found".

Thanks for answer!

I have a index.html file in the root which I see when accessing the site through the FTP IPv4-adress.

Any idea why it doesn't work?

Thanks for answer and sorry for my delayed answer. Haven't had time to look this up until now.

The IP I'm using is this: 2A02:0750:0005:0000:0000:0000:0000:0476

The weird thing is that when I go into the "Edit Virtual Server" option, the IPv6 adress doesn't show up anywhere just the "root" IPv6, like this image show: http://oi40.tinypic.com/8yub6w.jpg

I can't accept the IPv6 adress above through my web browser, is getting redirected to Google search.

Thanks for answer!

It doesn't show up under the "Server Configuration" -page. Like the image show: http://oi40.tinypic.com/2eydgso.jpg

But when I add the IPv6 adress under "Use private IPv6 adress" and hit "Change now" I get the following message:

Failed to change IP address : The virtual interface IPv6 address is already in use

What could be wrong?

Greetings

Thanks for answers.

The IP's ar not active on other systems. I have checked the "Already active" button, both when first creating the virtual server and also under "Server configuration > Change IP adress".

It seems as it shows up as it should now, don't now why it suddenly did. Check this image: http://oi39.tinypic.com/nox6z7.jpg

But it still doesn't work. I have checked with my host of the domain so I have made the right settings for the domain under AAAA. It should all be correct. I have done a check at http://go6.se/check/ see the image here: http://oi44.tinypic.com/35hmdxl.jpg

The /etc/hosts/ -file look like this:

::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts 127.0.0.1 localhost.localdomain localhost

79.99.*. hulken ni***.se hulken

What could be wrong?

Iv'e tested this.

First try to ping google with: ping6 ipv6.google.com

with the following result: connect: Network is unreachable

Then I tried to ping my IPv6-adress to the domain by following line: ping6 2A02:0750:0005:0000:0000:0000:0000:0476

I got the following lines repeating til eternity:

PING 2A02:0750:0005:0000:0000:0000:0000:0476(2a02:750:5::476) 56 data bytes 64 bytes from 2a02:750:5::476: icmp_seq=1 ttl=64 time=0.025 ms 64 bytes from 2a02:750:5::476: icmp_seq=2 ttl=64 time=0.040 ms 64 bytes from 2a02:750:5::476: icmp_seq=3 ttl=64 time=0.034 ms 64 bytes from 2a02:750:5::476: icmp_seq=4 ttl=64 time=0.035 ms 64 bytes from 2a02:750:5::476: icmp_seq=5 ttl=64 time=0.038 ms 64 bytes from 2a02:750:5::476: icmp_seq=6 ttl=64 time=0.034 ms 64 bytes from 2a02:750:5::476: icmp_seq=7 ttl=64 time=0.037 ms 64 bytes from 2a02:750:5::476: icmp_seq=8 ttl=64 time=0.036 ms 64 bytes from 2a02:750:5::476: icmp_seq=9 ttl=64 time=0.035 ms 64 bytes from 2a02:750:5::476: icmp_seq=10 ttl=64 time=0.030 ms 64 bytes from 2a02:750:5::476: icmp_seq=11 ttl=64 time=0.039 ms 64 bytes from 2a02:750:5::476: icmp_seq=12 ttl=64 time=0.037 ms

where the icmp_seg= just add one, like 13, 14, 15, 16 and so on.

Thanks for answer.

I will contact my ISP to look this up further.

Okay, so now I have contacted my ISP. And the problem was that iproute wasn't installed. I installed it with the command: apt-get install iproute.

After that I ping google with: ping6 ipv6.google.com and I get output:

PING ipv6.google.com(lpp01m02-in-x63.1e100.net) 56 data bytes 64 bytes from lpp01m02-in-x63.1e100.net: icmp_seq=1 ttl=50 time=20.4 ms 64 bytes from lpp01m02-in-x63.1e100.net: icmp_seq=2 ttl=50 time=26.0 ms 64 bytes from lpp01m02-in-x63.1e100.net: icmp_seq=3 ttl=50 time=20.3 ms

Almost the same looking as when I ping my own IPv6-adress, as shown in entry above.

But still the connection doesn't seems to work because entering the domain just show up a 401 doesn't found.

What could be the problem?

Nothing happens when accessing the domain. Neither in the browser or in the /var/log/virtualmin

Although I found this in the log (an there were a couple of other equal): 2001:4860:4801:1504:0:6006:1300:b075 - - [10/Feb/2012:09:40:11 +0100] "GET /robots.txt HTTP/1.1" 404 331 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 2001:4860:4801:1405:0:6006:1300:b075 - - [10/Feb/2012:09:40:11 +0100] "GET / HTTP/1.1" 403 326 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)"

Edit 1: If it adds to the discussion Im using venet0:0 and not eth0

Edit 2: I don't now if I could do it this way but I tried the following: 1. Webmin > Network > Network configuration > Network interface. 2. Choosed "Active interfaces" > "Add interface". 3. Name: Test, Netmask: Automatic, Broadcast: Automatic, IP-adress: 2A02:0750:0005:0000:0000:0000:0000:0476, IPv6 enabled "Checked", Added the IPv6-adress under "IPv6 adress": 2A02:0750:0005:0000:0000:0000:0000:0476, Netmask: 64, Status: Active, MTU: Automatic 4. Hitting enter returns the following error: Failed to add IPv6 address : SIOGIFINDEX: No such device

Thanks for answer.

The domain name is (without underscore and backspace): p_a___ul_ssonm__//usic.nu The IPv6-adress assign to the above domain i Virtualmin is: 2A02:0750:0005:0000:0000:0000:0000:0476

I get this when running the command you stated:

perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "sv_SE.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). p_a___ul_ssonm__//usic.nu All features OK

Thanks for your time!

Thanks for answer.

Yes, it have a index.html file with the text "It works!" in it.

Greetings