Some background info:
This physical system's ethernet interfaces were named enpss but for some reason they changed to en*
Since then, I had problem enabling/setting br0 which essentially rendered the physical server unusable....
network interfaces
br0 Bridge No address configured None fe80::e4ae:adff:fe75:5de6 Up
docker0 Unknown 172.17.0.1 255.255.0.0 fe80::42:81ff:feb7:a32e Up
eno1 Ethernet 1000Mb/s No address configured None 2600:1700:a500:8f20::561
2600:1700:a500:8f20:b01b:d3e3:6a98:db1b
fe80::c8f:2e38:49a3:da5a Up
eno2 Ethernet 1000Mb/s No address configured None 2600:1700:a500:8f20::77c
2600:1700:a500:8f20:e1f7:1ec7:7446:97c
fe80::c3d7:10fa:3011:846d Up
lo Loopback 127.0.0.1 255.0.0.0 ::1 Up
tap0 Unknown No address configured None fe80::7c37:37ff:fe22:309e Up
tap1 Unknown No address configured None fe80::6475:cdff:fe7f:8c09 Up
virbr0 Bridge 192.168.122.1 255.255.255.0
Up
virbr0-nic Bridge No address configured None
Down
Activated at boot
br0 Bridge From DHCP From DHCP From IPv6 discovery Yes
lo Loopback 127.0.0.1 255.0.0.0
Check status
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 19.44 GB of memory, which is at or above the Virtualmin recommended minimum of 256 MB.
BIND DNS server is installed, and the system is configured to use it.
Mail server Postfix is installed and configured.
Postfix is configured to support per-domain outgoing IP addresses.
Apache is installed.
The following PHP versions are available : 5.4.16 (/bin/php-cgi), 7.0.27 (/opt/rh/rh-php70/root/usr/bin/php-cgi), 5.4 (mod_php)
The following PHP-FPM versions are available on this system : 5.4.16 7.0.27
Webalizer is installed.
Apache is configured to host SSL websites.
MariaDB 5.5.60 is installed and running.
PostgreSQL is installed and running.
ProFTPD is installed.
Logrotate is installed.
SpamAssassin and Procmail are installed and configured for use.
ClamAV is installed and assumed to be running.
Plugin AWstats reporting is installed OK.
Plugin Administrator's Notes is installed OK.
Plugin Analytics Tracking is installed OK.
Plugin Bootup actions is installed OK.
Plugin DAV Login is installed OK.
Plugin DNS Domain Registration is installed OK.
Plugin Git repositories is installed OK.
Plugin Protected web directories is installed OK.
Plugin SQLite Databases is installed OK.
Plugin Disable Virtual Server On Schedule is installed OK.
Plugin Slave DNS domain is installed OK.
Plugin Additional content styles is installed OK.
Plugin Additional content styles from OpenWebDesign.org is installed OK.
Plugin Virtualmin Support Links is installed OK.
Using network interface eno1 for virtual IPs.
IPv6 addresses are available, using interface eno1.
Virtualmin could not work out the default IPv4 address for virtual servers on your system. You will need to update either the Network interface for virtual addresses or Default virtual server IP address fields on the module configuration page.
.. your system is not ready for use by Virtualmin.
Status:
Closed (fixed)
Comments
More info/details about the issue:
Network Interfaces in
/etc/sysconfig/network-scriptsifconfig
Strangely, in
Network Config - Hostname and DNS Client,i found the followingfor
Resolution order:Submitted by JamieCameron on Sun, 07/28/2019 - 19:01 Comment #3
That
mdns4_minimalline isn't a problem..The interface name change is due to a kernel or boot parameter - it isnt something Virtualmin controls.
Created eno1 from
Webmin - Networking - Network Configuration - Network Interfaces - Add a new interfaceand it resolved the issue.Submitted by IssueBot on Thu, 08/22/2019 - 11:11 Comment #5
Automatically closed - issue fixed for 2 weeks with no activity.