Cloudmin Client Connect will not work on my Virtualmin host

hyper3xpl0iter's picture
Submitted by hyper3xpl0iter on Tue, 03/14/2017 - 11:19

I have both the external DNS and MySQL servers registered and setup (showing webmin) for Cloudmin Client on the Cloudmin box, but when I try to setup Cloudmin Client on the Virtualmin machines it says "check failed : DNS service not supported" and "check failed : MySQL service not supported"

How do I get Cloudmin Client Services to work?

Status: 
Active

Comments

Submitted by andreychek on Tue, 03/14/2017 - 23:02

Howdy -- sorry for the delay!

I'm curious if maybe one of the requirements for hosting those features needs to be setup... those can be seen here:

https://www.virtualmin.com/documentation/provisioning/hosts

Take a peek at the section at the top labeled "Host System Requirements" -- does it seem like those are all met, or could one or more of those be an issue?

hyper3xpl0iter's picture
Submitted by hyper3xpl0iter on Wed, 03/15/2017 - 11:15

Hey, I check that link and can confirm that everything is how it should be. I made sure that there is a DMZ pinhole on my firewall to make sure that Virtualmin can connect to all servers and hosts

Submitted by JamieCameron on Wed, 03/15/2017 - 22:58

Make sure that on the Cloudmin system you have registered at least one host for DNS and MySQL hosting.

hyper3xpl0iter's picture
Submitted by hyper3xpl0iter on Thu, 03/16/2017 - 07:51

Hey, yes I have 2 of each registered. 2 for DNS and 2 for MySQL.

Submitted by JamieCameron on Thu, 03/16/2017 - 23:13

If you SSH into the Cloudmin master system and run :

cloudmin list-provision-features --multiline

what does it output?

hyper3xpl0iter's picture
Submitted by hyper3xpl0iter on Fri, 03/17/2017 - 12:12

Hey Jamie, That command shows the following error:

ERROR: System owner was not found

Submitted by JamieCameron on Fri, 03/17/2017 - 20:15

Oh, you need to add the flag --owner xyz where xyz is the Cloudmin system owner that you configured the Virtualmin system to use.

hyper3xpl0iter's picture
Submitted by hyper3xpl0iter on Mon, 03/20/2017 - 08:16

Thanks Jamie! here is the output

dns
    Description: DNS zones
    Limit: 1000
    Usage: 0
    Systems: 1
dnsslave
    Description: DNS slave zones
    Limit: 0
    Usage: 0
    Systems: 1
mysql
    Description: MySQL logins
    Limit: 1000
    Usage: 0
    Systems: 2
mysqldb
    Description: MySQL databases
    Limit: 1000
    Usage: 0
    Systems: 2
virus
    Description: Virus clients
    Limit: 1000
    Usage: 0
    Systems: 0
spam
    Description: Spam clients
    Limit: 1000
    Usage: 0
    Systems: 0

Submitted by JamieCameron on Mon, 03/20/2017 - 21:13

Make sure that on the Cloudmin system, at Virtual System Owners -> System Owners -> the-provisioning-user -> Additional limits and capabilities, that the user is allowed to create DNS zones and MySQL databases.