ipv6 installation

Submitted by hescominsoon on Sat, 02/25/2017 - 17:46 Pro Licensee

I have the following interfaces:

enp0s25 Ethernet 199.15.253.2 255.255.255.248
Yes
  enp0s25:1 Ethernet (Virtual) 199.15.253.3 255.255.255.248
Yes
  enp0s25:2 Ethernet (Virtual) 199.15.253.4 255.255.255.248
Yes
  enp0s25:3 Ethernet (Virtual) 199.15.253.5 255.255.255.248
Yes
  enp0s25:4 Ethernet (Virtual) 199.15.253.6 255.255.255.248
Yes
enp6s0 Ethernet No address configured None
No
lo Loopback 127.0.0.1 255.0.0.0

I also have the following ipv6 information given to me by my provider:
BLOCK: 2604:4100:2:7::/64
GATEWAY: 2604:4100:2:7::1

how and where do i put this into virt...let's try to get ipv6 working correctly..:)

Status: 
Closed (fixed)

Comments

Submitted by JamieCameron on Mon, 02/27/2017 - 22:38

First off, you should go to Webmin -> Networking -> Network Configuration -> eth0, and enter an address in the 2604:4100:2:7::/64 block as your primary IP. Also in that module, you can set the IPv6 default gateway.

Submitted by hescominsoon on Tue, 02/28/2017 - 05:55 Pro Licensee

I do not have eth0 look at the interfaces i have listed...

Submitted by hescominsoon on Tue, 02/28/2017 - 05:58 Pro Licensee

enp0s25 Ethernet 199.15.253.2 255.255.255.248 Yes enp0s25:1 Ethernet (Virtual) 199.15.253.3 255.255.255.248 Yes enp0s25:2 Ethernet (Virtual) 199.15.253.4 255.255.255.248 Yes enp0s25:3 Ethernet (Virtual) 199.15.253.5 255.255.255.248 Yes enp0s25:4 Ethernet (Virtual) 199.15.253.6 255.255.255.248 Yes enp6s0 Ethernet No address configured None
No lo Loopback 127.0.0.1 255.0.0.0
Yes

should i add it to enp6s0 or enp0s25?

Submitted by andreychek on Tue, 02/28/2017 - 10:19

Jamie just meant your default interface -- from looking at your output above, it looks like that is "enp0s25".

Submitted by hescominsoon on Sat, 04/15/2017 - 18:02 Pro Licensee

Status: Active » Fixed (pending)

Submitted by IssueBot on Thu, 10/11/2018 - 20:07

Status: Fixed » Closed (fixed)

Automatically closed - issue fixed for 2 weeks with no activity.