I am using centos 6.5 and I've just installed virtualmin. I can access by going to static lan ip 192.168.10.106 problem is I have a static ip address assigned by my isp. I am behind a modem and router. I have forwarded the ports needed for virtualmin but i cannot access by using my tld deviousmediaproductions.tk or by my static ip 64.53.243.135 how can I correct this problem?
when i run the check this is what I get
Checking Configuration
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 1.82 GB of memory, which is at or above the Virtualmin recommended minimum of 256 MB.
Virtualmin is configured to setup DNS zones, but this system is not setup to use itself as a DNS server. Either add 127.0.0.1 to the list of DNS servers, or turn off the BIND feature on the module config page.
.. your system is not ready for use by Virtualmin.
Comments
Submitted by andreychek on Thu, 02/13/2014 - 21:46 Comment #1
Howdy -- one thing you'd want to do is to add the entry to the resolve.conf that was mentioned in the error you saw. Also, in System Settings -> Virtualmin Config -> Network Settings, you'd want to set "Default IP address for DNS records" to " Automatically detect external address".
It looks like you're using Virtualmin GPL there though, so if you're still having problems after the above you'd want to use the Forums to go over the issue you're seeing. We monitor those, along with lots of wonderful folks in the community!
When creating a Forum post, let us know what error(s) you see when trying to access your website.
Submitted by tharldvs1 on Thu, 02/13/2014 - 22:36 Comment #2
I tried but still cannot access using static external ip nor by my tld ran check again and
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active .. Your system has 1.82 GB of memory, which is at or above the Virtualmin recommended minimum of 256 MB. BIND DNS server is installed, and the system is configured to use it.
Mail server Postfix is installed and configured.
Your Postfix version does not support per-domain outgoing IP addresses.
Apache is installed.
The following PHP versions are available : 5.3.3 (/usr/bin/php-cgi)
Webalizer is installed.
Apache is configured to host SSL websites.
MySQL is installed and running.
ProFTPd is installed.
Logrotate is installed.
SpamAssassin and Procmail are installed and configured for use.
ClamAV is installed and assumed to be running.
Plugin DAV Login is installed OK.
Plugin AWstats reporting is installed OK.
Plugin Mailman is installed OK.
Plugin Protected web directories is installed OK.
Using network interface em1 for virtual IPs.
IPv6 addresses are available, using interface em1.
Default IPv4 address for virtual servers is 192.168.10.106.
Virtualmin could not work out the default IPv6 address for virtual servers on your system. You will need to update either the Network interface for virtual addresses or Default virtual server IP address fields on the module configuration page.
Both user and group quotas are enabled for home and email directories.
All commands needed to create and restore backups are installed.
The selected package management and update systems are installed OK.
.. your system is ready for use by Virtualmin.
Submitted by andreychek on Thu, 02/13/2014 - 22:51 Comment #3
As I mentioned above, if you have additional questions, as a Virtualmin GPL user you'd want to open a new Forum post to go over your questions. You can create a new Forum post by clicking the "Forum" link at the top of the page.
When opening a new Forum post, be sure to explain what error you're seeing when trying to access your site. Thanks!